Our black conductive film meets electrical requirements of MIL-P-82646A. It is made from a single layer of carbon-loaded polyethylene and its conductivity does not depend on humidity. It is non-sloughing, does not contaminate components it comes in contact with despite repeated use, and is groundable.

Properties:
- Color – Black Opaque – Printable
- Tensile Strength – >2000 PSI
- ASTM D 882
- Elongation (MD %) – >150%
- ASTM D 882
- Dart Impact – 250 to 700 grams
- ASTM D 1709
- Tearing Strength – >400 lbs. per inch
- ASTM D 882
- Burst (Mullen) – 20 to 60 PSI
- ASTM D 774
Performance:
- Volume Resistivity – <30,000 OHMS/cm
- Surface Resistivity – <30,000 OHMS/Sq
- Meets ASTM D 991, ASTM D 257 and is ROHS Compliant
Product is suitable for automatic bag-making machines:
- Temperature – 250°F – 375°F
- Time – 0.5 – 3.5 seconds
- Pressure – 30 – 70 PSI
Applications:
- For packaging of static sensitive components, where
electrostatic contamination is a problem.
Products Available:
- Bags
- Tubing
- Sheeting


Black Conductive – MIL-P-82646
Extra Packaging is U.S. Navy certified for Black Conductive film and bags to MIL-P-82646. Black Conductive bags and film must be a run at .0035/.004 mils to conform to the MIL Specification. However, we can extrude down to .002/.0025 upon request.
Production Style Available:
Bags:
- Bottom Seal
- Side Weld
- Zipper
- Compartment
- Custom
- Gauge Range: .002 to .010 mil
Film:
- Tubing
- Centerfold
- Single Wound Sheeting
- Double Wound Sheeting
- J Film
- U Film
- 2″ – 60″ Layflat
Materials: Conductive Carbon PE Materials
Application: Highly recommended for packaging of explosive powders and other critical applications. The material has low electrical resistance, and allows electrons to flow easily