|
Over 40 years of experience meeting the packaging needs of our customers. 1-888-353-9732 [email protected] |
|
Contact Us
 Interested in placing an order or discussing a custom packaging need?
Contact us and a knowledgeable product specialist will assist you.
For assistance with ordering Heat Sealers and Packaging Equipment, ask for product specialist: Lori Lipani Toll Free: 888 353 9732 Tel: 585 544 1200 Fax: 585 544 2586 Send an email |
|
|
PacWrap Heat Guns
The Pro's Choice for Shrink Wrapping
 |
SPECIFICATIONS | |
| Power Req.: | 115 volts, 60 cycle | |
| Amps: | 10 | |
| Weight: | 1.3 lbs | |
| Warranty: | 2-Year Full Warranty | |
| Also available: | 220/240 volts, 50Hz Export Model | |
The PacWrap® Heat Gun is the heat gun that won't burn holes in your film! Why? Because the PacWrap® Heat Gun was specifically designed for shrink film (not paint stripping). The exclusive shock-mounted motor and heating elements will save you the cost of a repair or replacement every time it's dropped. Fully warranted for two years.
The PacWrap® Heat Gun is perfect for use with any PVC/PP or Polyolefin shrink films.
Plus, the PacWrap® Heat Gun is built tough too! The heavy duty motor and heating elements are shock-mounted in a super-strong lightweight plastic compound case. That means the PacWrap® Heat Gun can take all the hard knocks and accidental drops you can dish out, and keep running beautifully. Like all our superior shrink wrapping equipment and shrink films you get our "hassle-free" 30-day money-back guarantee. PLUS, the PacWrap® Heat Gun carries our industry leading TWO-YEAR FULL Warranty! We know the quality we build into every PacWrap® Heat Gun, and you should, too! Order one TODAY!
Your new PacWrap® Heat Gun was specifically designed to provide the perfect amount of heat and airflow needed for work with shrink film, without burning through the film.
The lightweight plastic case is made of Lexan (similar to the plastics used in football helmets). The motor and heating elements are "shock mounted" so don't worry if it's accidentally dropped -- it will keep running beautifully.
If you have a lot of packages to do at once, you may find it's easier to seal all the packages first, then shrink them down. If you have packages that have been handled and the shrink wrap on the package is starting to look wrinkled, you usually don't have to tear off the old shrink film. Just use the PacWrap® Heat Gun again, and "blow away the wrinkles."
Once your package is sealed, hold the tip near the shrink film at about a 45-degree angle. (Don't hold it 6 inches away from the package and "wiggle it" like you have had to do using the old style heat guns. Those guns were designed to peel paint off of wood, and burn too hot for shrink film.) Do the edges of your package first, then the back and finally the front.
Your new PacWrap® Heat Gun is warranted for two years from the date of purchase. If you have any questions please contact us.
For assistance with ordering Heat Sealers and Packaging Equipment, ask for product specialist:
Lori Lipani
Toll Free: 888 353 9732
Tel: 585 544 1200
Fax: 585 544 2586
Send an email